Skip to the page's content
Formulations

For All Hair Kinds Mask

Condition and hydrate all hair types with this simple mask. A combination of Sunflower, Orange Peel and Carnauba wax structure the mask whilst coconut oil helps to nourish the hair.

Request Available Samples (8)
4

Formulation

Select products to request samples

Phase A

Water
58.10%
GreenGard™ PA
GreenGard™ PA Green Line Ingredients 0.10%

Phase B

Glycerin
3.00%
Hydroxypropyl Guar (and) Hydroxypropyltrimonium Chloride
0.40%
Xanthan Gum
0.60%

Phase C

GreenWax™CC
4.00%
Sunflower Wax
Sunflower Wax Koster Keunen 6.00%
Orange Peel Wax
Orange Peel Wax Koster Keunen 2.00%
Carnauba Wax
Carnauba Wax Koster Keunen 4.00%
Babassu Oil Polyglyceryl-4 Esters (and) Water
1.00%
BergaCare SB
BergaCare SB Berg+Schmidt 3.00%
Raw Organic Certified Virgin Coconut Oil
Coffea Arabica (Coffee) Seed Oil (and) Hydrogenated Vegetable Oil
1.00%
Undecane (and) Tridecane
5.00%
Lauryl Glucoside
5.00%

Phase D

Orange Blood Italian Oil
0.30%
GreenSolv™ 168 MB
GreenSolv™ 168 MB Green Line Ingredients 2.50%

Phase E

GreenGard™ LA
GreenGard™ LA Green Line Ingredients 2.00%

Phase F

Citric Acid (and) Water
0.00%
Water (and) Sodium Hydroxide
0.00%

Specifications

Appearance
Viscous, cream-like, TMS
Color
Off-white, TMS
Odour
Fragrance @ 0.3%, TMS
pH
4.0-5.5
Viscosity (spindle TA, 0.3 rpm)
333,300 cPs [20%] (initial), 675,000 cPs [40%] (final)

Procedure

  1. 1 In a suitably-sized main kettle, weigh Phase A and begin propeller mixing/heating to 85-90ºC.
  2. 2 In a separate container, pre-blend phase Phase B until uniform. Slowly add to main kettle while propeller mixing.
  3. 3 In a suitably-sized side kettle, weigh Phase C and mix/heat to 85-90ºC.
  4. 4 When both kettles are uniform and at temperature, slowly add side kettle to main kettle while propeller mixing. Continue mixing for 3-5 minutes.
  5. 5 Homogenize at temperature for 1 minute/100g final batch size. Then, remove heat and switch to side-sweep mixing.
  6. 6 In a separate container, pre-blend Phase D until uniform.
  7. 7 With side-sweep mixing, cool main kettle to <50ºC. Then, slowly add Phases D and E. Ensure each Phase is completely dispersed prior to adding the next.
  8. 8 If needed, adjust pH with ingredients listed in Phase F. Disperse additions with side-sweep mixing.
  9. 9 When batch is in spec, cool to room temperature. If needed, homogenize for an additional 15-30 seconds/100g final batch size. Drop batch into appropriate containers for storage.

The information herein is currently believed to be accurate. We do not guarantee its accuracy.

Purchasers shall not rely on statements herein when purchasing any products. Purchasers should make their own investigations to determine if such products are suitable for a particular use. The products discussed are sold without warranty, express or implied, including a warranty of merchantability and fitness for use. Purchases will be subject to a separate agreement which will not incorporate this document.

Enquiry

0

Your enquiry is empty

Add products to start your enquiry.

Browse products