|
JEFFCAT® DMAPA
|
Dimethylaminopropylamine
|
Used in many polyurethane foam (PUR) and flexible slabstock and HR moulded foam applications.
Other uses include surfactant preparation, corrosion inhibitors, ash-free lubricant additives, producing electrophoretic coatings, clothing anti-static preparations. Derivatives and reactants could also be used to make pharmaceutical preparations.
|
|
|
JEFFCAT® DMCHA
|
N,N-dimethylcyclohexylamine
|
Widely used general purpose catalyst for polyurethane foam (PUR).
|
|
|
JEFFCAT® DMDEE
|
2,2-dimorpholinodiethylether
|
A selective blowing catalyst for flexible foams.
Used in coatings, adhesives and one-component moisture cured systems.
|
|
|
JEFFCAT® DMEA
|
N,N-dimethylethanolamine
|
Typically used in flexible foams and polyurethane foams (PUR).
Used as an acid scavenger in polymeric isocyanate systems.
|
|
|
JEFFCAT® DPA
|
N-(3-dimethylaminopropyl) -N,N-diisopropanolamine
|
Low emission catalyst, gives good flow, used in flexible foams, polyurethane foam (PUR) and in elastomers and RIM (reactive injection moulded) systems.
|
|
|
JEFFCAT® NEM
|
N-ethylmorpholine
|
Gives rapid surface cure in flexible polyester foams. Used in rigid polyurethane foam (PUR) for packaging.
|
|
|
JEFFCAT® NMM
|
N-methylmorpholine
|
Solubiliser for flexible foams. Used in rigid polyurethane foam (PUR) packaging foam.
Starting formulations on JEFFCAT® NMM in polyester foam are available upon request.
|
|
|
JEFFCAT® PMDETA
|
Pentamethyldiethylenetriamine
|
Highly selective rigid polyurethane foam (PUR) and polyisocyanate foam (PIR) catalyst.
Recommended as a co-catalyst to improve cure rate and processing of PIR laminate broadstock from polyester polyols.
Recommended for rigid urethane refrigeration applications.
|
|
|
JEFFCAT® T-12
|
Dibutyltin dilaurate
|
Widely used as a crosslinker for the polyol-isocyanate reaction.
|
|
|
JEFFCAT® TAP
|
1-methyl-4-(2-dimethylaminoethyl) piperazine
|
Rigid polyurethane (PUR), Slabstock and moulded flexible foam co-catalyst with good end-cure catalyst that improves flow on gelation.
Catalyst for elastomers and RIM (reactive injection moulded) systems.
|
|
|
JEFFCAT® TD-100
|
Triethylene diamine (TEDA)
|
Strong gelling catalyst, used as an activator in flexible polyurethane and rigid polyurethane (PUR) foams.
Catalyst for elastomers, coatings, adhesives and RIM (reactive injection moulded) systems.
|
|
|
JEFFCAT® TD-33A
|
33% Triethylene diamine (TEDA) in dipropylene glycol
|
Standard general purpose amine catalyst for polyurethanes. Used in most foam types – slabstock and moulded flexible foam, rigid polyurethane (PUR) foam.
Catalyst for elastomers, coatings, adhesives and RIM (reactive injection moulded) systems.
|
|
|
JEFFCAT® ZF-10
|
N,N,N’-trimethyl-N’-hydroxyethyl-bisaminoethylether
|
Efficient high blowing catalyst. Non-fugitive catalyst as it is incorporated into the polymer.
Used in flexible foam and rigid polyurethane (PUR) packaging foam especially when low emissions are required.
|
|
|
JEFFCAT® ZF-22
|
70% Bis-(2-dimethylaminoethyl)ether in dipropylene glycol
|
Typically used in flexible slabstock and moulded foams and rigid polyurethane foam (PUR).
Used with other amine catalysts to balance blowing and gellation.
|
|
|
JEFFCAT® ZF-24
|
23% Bis-(2-dimethylaminoethyl)ether in dipropylene glycol
|
Typically used in flexible slabstock and moulded foams and rigid polyurethane foam (PUR).
Used with other amine catalysts to balance blowing and gellation.
|
|
|
JEFFCAT® ZR-70
|
2-(2-dimethylaminoethoxy)ethanol
|
Mainly used in rigid polyurethane (PUR) packaging foams.
Non-fugitive (can react with isocyanates to be incorporated into the polymer) and highly reactive catalyst for moulded foams.
|
|